Shutter Width
Measure the brick opening width (top, middle and bottom) as indicated by the arrows. From each edge of this opening width 53mm of shutter guide rail is required on each side. (this is the full shutter width, overall guide width)
Shutter Height
Measure the height from floor level or cill level to underside of brick opening height. This is the guide height, add the shutters box size, headroom. (This is the shutters Total height.) The box, headroom is dependent upon the height of the shutter- see (shutter door box sizes below) for required sizes. When the door is fully raised, a minimum of 55mm bottom slat hangs down into the guide rails. This is the shutter opening height (see drawing below)
REVEAL FIXING SHUTTERS:
Shutter Width
Measure the brick reveal opening width (top, middle and bottom) as indicated by the arrows. 53mm guide rails on each side are inclusive of the reveal opening width, (this is the full shutter width, overall guide width)
Shutter Height
Measure the height from floor level or cill level to underside of brick opening height. If the shutter is installed within the recess, the height of the shutter box will be included in the shutter height. (This is the full shutter total height) When the door is fully raised, a minimum of 55mm bottom slat hangs down into the guide rails. (see drawings below)
Installation:
The shutters can be fitted to the wall, window or door frame of the property. The shutters can also be installed inside the property.
Ensure that the shutter cannot catch on anything that protrudes past the brick-line (i.e. door handles)? Packers may be required to avoid this.
